Product Description
This is the intercooler intake hose,which contains the material like silicone and fluorine.The inner tube uses the FKM and the outer one with the VMQ.Our products are well produced and we have done such test programs: 1) Hardness :60±5 shore a 2) Tensile strength and elongation:tensile strength≥12Mpa,elongation≥200% 3) Burst strength:≥1.0Mpa 4) Adhesive strength:≥3.0KN/M 5) Pulse capability:the inner temperature 190ºC,outer temperature 120ºC,the test pressure 0~2.5bar,pulse frequence 0.25HZ,vibration shift 25mm,vibration shift 1HZ,300000 times no broken. 6) Property after heating aging:hardness change 0~15 shore a,tensile strength change≤-30%,elongation change≤-50% Test itemsPerformance Hardness60±5 shore a Tensile strength≥12Mpa Elongation≥200% Burst strength≥1.0Mpa Adhesive strength≥3.0KN/M Pulse capabilitythe inner temperature 190ºC,outer temperature 120ºC,the test pressure 0~2.5bar,pulse frequence 0.25HZ,vibration shift 25mm,vibration shift 1HZ,300000 times no crack Property after heating aginghardness change 0~15 shore a,tensile strength change≤-30%,elongation change≤-50% Besides,we also provide the turbo charger hoses with the material silicone,HT-ACM or HT-AEM.If you want,we can provide the products like this. We have been doing this job for many years and we have been trying our best to make the good products with the reasonable price. our price is neither the highest nor lowest, but I assure you its the most reasonable. And we very appreciated that our customers support us. All the product are supervised by the special department. The quality is assured. Feel free to call me for any question or new samples. Thank you! I will do my best for you. Best regards!